Simple Hack to Cling Artwork Completely Straight | Thrifty Decor Chick

Cling artwork simply with this painter’s tape hack!

If you happen to’ve ever struggled hanging artwork or mirrors with a couple of hook on the again, this beneficial little trick is for you!

We have all been there — if you aren’t getting the holes drilled completely within the wall, all the pieces is wonky.

That is particularly useful on bigger gadgets which have a protracted expanse between the hooks, longer than a typical 24 inch stage.

It is also good while you’re attempting to hold heavy gadgets like mirrors. Lifting it time and again to search out that your holes aren’t completely spaced is a significant ache:

It might even be GREAT for a gallery wall while you’re utilizing the identical sort of body time and again. The hooks ought to be the identical distance on every body. 😉

I first used this straightforward artwork hanging trick years in the past after I was reworking our son’s rest room. I bought these IKEA mirrors for the lavatory renovation:

This publish might include affiliate hyperlinks in your comfort.

I’ll earn a small fee when you make a purchase order by means of hyperlinks.

They’re the Stockholm mirrors and are so fairly! I nonetheless hope to make use of certainly one of these once more in our present house!

They’re fairly giant so the holes on the again have been far aside. You need to use a stage, however most are 24 inches or shorter. Though we’ve a 4 foot stage, I discovered this trick to be way more exact than measuring and attempting to switch that measurement onto the wall.

As a result of I used to be drilling into tile I wished this to be as actual as attainable. This little hack is fairly straightforward.

You may must seize some painter’s tape (or any masking tape) and place it throughout the holes on the again of your artwork or mirror:

Art or mirror hanging trick with painter's tape

This publish might include affiliate hyperlinks in your comfort.

Make certain the tape is positioned on the similar spot on all sides. (That means the identical distance from the highest of the tape.) Then I poked a gap by means of the painter’s tape:

You may as well mark it with a pen for a actually exact measurement.

Subsequent, peel off your tape and place it the place you need on the wall. You may nonetheless want a level for this half, however the good factor is sort of any stage will work. You do not want an excellent lengthy one to test how stage your tape is.

Maintain it in opposition to the tape to test. Regulate the tape accordingly:

You then simply drill, utilizing your marks as a information!

If you happen to’re drilling proper into drywall or wooden, you may simply want a screw or nail for lighter artwork, or anchors for heavier gadgets. These screw in anchors save a ton of time!

On this explicit challenge, I needed to drill into tile, which is all the time nerve-racking! When drilling into tile it is advisable use a bit particularly for this job — this tile and glass drill bit set is what I’ve.

I like that they embrace 4 totally different sizes:

It takes awhile to get by means of the tile — you may want some endurance and a completely charged drill. 😉

Then you’ll be able to insert your anchors or screws and cling your merchandise! Take care and be affected person when screwing into tile, even after the opening has been added.

Once more, I’ve all the time measured with tape or a stage however I discovered this to be way more exact. I wasn’t going to fiddle with this tile!: